3THERMO RADIATOR

REVOLUTIONARY CONCELAED HYBRID RADIATOR FOR WALL HEATING

It transforms (external) wall into an active thermal barrier. It offers the cheapest, safest, cleanest and most efficient heating on the market today.

WHAT IS 3THERMO RADIATOR?

3Thermo is a concealed hybrid radiator that transforms external wall into an active thermal barrier. It offers the cheapest, safest, cleanest and most efficient heating on the market today.

HOW DOES IT WORK?

3Thermo radiator is an element of central heating system with hot water as the medium. The water pipes are not located in the wall where the radiator is installed so there is no danger for leaking pipes in the wall.

3Thermo radiates the heat and the feeling is similar to warmth we feel from the sun.

WHY HYBRID?

3Thermo radiator exchanges the heat between hot water and gas. The hot water runs through the water collector that is located on the bottom of the radiator. When the water comes into the contact with the gas from the cores, the gas immidiately reacts and vertically transmits the heat from the water to the cores, mesh and the wall. The gas is unexplosive and harmless to the health.

WHERE IS IT INSTALLED?

Dry construction: The radiator is imprinted in the plasterboard, standard dimensions 200x60x1,25 cm

Wet construction: We can mount it on brick or concrete wall. The radiator is covered by min 10,5mm+ thick layer of plaster, or ceramic, stone, concrete tiles.

The radiator can be installed in external and internal wall or on the roof. We get the best effect if we install it in places where the biggest heat losses occur – in external walls and the roof.

3Thermo radiator is suitable for all kinds of buildings; residential, public, office buildings, old or new, well insulated or no insulated at all.

WET CONSTRUCTION

3 VERTICAL PIPES
The radiator core is made of 3 aluminium pipes, filled with unexplosive and harmless gas. When the gas reacts with the hot water in the collector, it quickly and vertically transmits heat without consuming additional energy, which greatly increases its efficiency. The medium in gas form has the highest diffusion properties and efficiently transmits heating energy to the radiator structure. The core is physically seperated from the water collector – hydraulic part.

WATER COLLECTOR
The collector sits at the bottom of the radiator unit and features a water connector to be connected to the pipe installation on both sides (warm water source on either side). The water collector design completely eliminates the ingress of air into the system.

ALU MESH (Rabitz mesh)
Aluminum mesh with a very high conduction coefficient distributes the heat between cores and transmits it to the plaster layer, giving the whole wall properties of a radiator. With regard to its structure (Rabitz formula), it also provides reinforcement for the plaster and prevents the material from shrinking. The mesh is woven between the cores and it is not rigidly connected, which prevents internal stresses in the system or cracking of the plaster.

DIMENSIONS
Height: 1700 mm or 800 mm
Width: 600 mm
Depth: 8,5 mm
Pipe: TECEFLEX 16 x 2,2 PeXc/Al/Pe-rt

DRY CONSTRUCTION

3Thermo radiator za suho (montažno) gradnjo je zasnovan kot sistem dva v enem. Radiator je že tovarniško vtisnjen v mavčno ploščo standardnih dimenzij 200x60x1,25cm.

Ploščo se običajno pričvrsti na profile montažne stene. Grelna moč tovrstnega radiatorja je enaka kot pri klasičnem 3thermo radiatorju.

3Thermo radiator v mavčni plošči nima aluminijaste mreže in je sestavljen iz petih vertikalnih cevi.

DIMENSIONS
Height: 2000 mm
Width: 600 mm
Depth: 12,5 mm
Pipe: TECEFLEX 16 x 2,2 PeXc/Al/Pe-rt

31ml

Max water Q in the radiator

35-60°C

Recommended water T in the circuit

110°C

Max water T in the circuit

16-24°C

Room T

25-42°C

Wall T

1,38kg

Radiator weight

289W

Max power output (at 60°C)

1m2

Heating surface / unit

10,5mm+

Plaster thickness

Aluminium

Material

Radiation

Heat transfer

20 years

Warranty

3Thermo radiator is exceptional

Let's heat our homes efficiently and cheaply

HEALTHY

It is the most hygienic and cleanest heating system in the world! It does not require any cleaning, maintains optimum air moisture and prevents development of alergens, moulds and fungi on the walls.

ECONOMICAL

Up to 40% lower heating costs, because it prevents heat losses at the place of their occurrence – in external walls.

SAFE

The radiator’s core is filled with unexplosive and harmless gas. A unit concealed in the plaster layer may be damaged, but it will not unseal the water system; the central heating system will continue working.